Add SettingsInfoBox title support and experimental feature warning for Sleep Detection and Personalized Volume toggles with issue tracker action.
Pro-gate tone volume, microphone mode. Un-gate sleep detection, conversation awareness. Fix SettingsSwitchItem allowing direct switch toggle to bypass requiresUpgrade.
Older devices silently ignore the 0x4D packet, so there is no need to gate it per model. Sending it unconditionally prevents silent feature degradation when new H2+ models are added without the flag.
Remove needsInitExt from PodModel.Features.
Combine reaction one-pod mode (autoplay/autopause) and firmware NC-with-one-AirPod into one setting. The merged toggle always sets the app-local flag and additionally syncs the firmware NC setting via AAP when connected.
Also remove redundant @OptIn(ExperimentalCoroutinesApi::class) annotations from tests, already covered by the global compiler opt-in flag.
Real AirPod firmware silently drops writes with the LibrePods-documented 0x21 subtype. Switch to the compact 0x20 format that matches what devices actually emit in their echo frames. Also enforce the complementary-pair invariant at the SetEndCallMuteMic command boundary so validation runs before the optimistic UI update.
The encode/decode now flips UI 0..100 to wire 100..0. Update the clamp and decode expectations accordingly, and add a round-trip test to guard against asymmetric changes in either direction.
PlayPause coerced null per-side ear values to false, making all ear states invisible when resolvedPrimaryPod was unknown. Fall back to AAP aggregate state (isBeingWorn/isEitherPodInEar) when per-side mapping is unavailable, keeping PodDevice.isLeftInEar/isRightInEar truthful for UI consumers. Add isEitherPodInEar to PlayPauseMonitorKey for proper dedup. Add diagnostic logging at the distinctUntilChangedBy boundary.
Move each composable from PodCardComponents.kt into its own file under a new cards/components/ subpackage. Add previews to each file. Also add getBatteryIcon() for Compose Material Icon battery levels used in the popup.
When both pods broadcast independently (one in case, one on desk), the pod inside the case carries authoritative case state via hasCaseContext bits. Previously, whichever address was processed last would overwrite the other, causing case state to flip-flop between OPEN and NOT_IN_CASE every scan cycle.
Two-layer fix: BlePodMonitor.processWithCache() now prefers the pod with case context when two scan results map to the same identity in one batch. ApplePodsFactory.getLatestCaseLidState() no longer treats NOT_IN_CASE as authoritative when recent history contains a broadcast with case context.
Migrate reaction toggles (auto-play, auto-pause, auto-connect, popups) from global ReactionSettings singleton to per-profile fields on AppleDeviceProfile. Each paired device can now have independent reaction behavior.
Extract ReactionConfig snapshot to decouple PodDevice from AppleDeviceProfile — reaction consumers read device.reactions instead of device.profile. Remove auto-connect from upgrade benefits (now free). Add LegacyReactionSettingsReader for one-shot DataStore migration.
Switch the AAP rename packet to the opcode 0x1A format (04 00 04 00 1A 00 01 [size] 00 [name]) matching the LibrePods documentation and Linux implementation. The previous 0x1E variant (from the LibrePods Android code) was silently ignored by AirPods Pro 2 USB-C firmware — no 0x001D echo, no persistence across reconnect.
Verified on AirPods Pro 2 USB-C (firmware 81.2675...): the device now echoes the new name back via the next 0x001D INFORMATION message, and the name persists after disconnect/reconnect.
Also hardens the rename UX: gate the edit icon on isAapReady (was isAapConnected, which allowed sending during HANDSHAKING), apply an optimistic deviceInfo update with a scoped rollback on send failure, surface send errors via a new Event.SendFailed + snackbar, and restrict dialog input to ASCII with inline error feedback. Unifies send() / sendProGated() through a single sendInternal() helper so error plumbing benefits every command, not just rename.
Note: this only updates the AirPods firmware's self-reported name. Android's system Bluetooth settings read from the bond database and are not affected — renaming there still requires the Android system Bluetooth UI.
Diagnostic-only NUL-delimited UTF-8 segmentation of the 0x1D INFORMATION packet, logged at INFO so it lands in debug recordings via the existing FileLogger pipeline. The production decode path stays untouched — this only adds visibility, no behavior change. Refs #173.
- Show connected device MACs in correct byte order (remove stale reversal)
- Rename 'Volume Swipe Length' setting to 'Volume Swipe Wait Time'
- Hide 'Charging Sounds' toggle: real case tones go over ATT and the actual effect of this AAP setting is unknown. Decode kept internally so AAP freshness signal still refreshes.
- Fix duplicate commands on End Call/Mute Mic radio buttons: use Modifier.selectable with Role.RadioButton, short-circuit when already selected, and wrap options in selectableGroup for TalkBack.
Add 8 new AAP writable settings (microphone mode, ear detection toggle, listening mode cycle, allow off, stem config, sleep detection, in-case tone, device rename) and 4 new data reception features (stem press events, connected devices, audio source, EQ data).
Implement stem press action system with per-bud configurable Android actions (play/pause, next/prev track, volume), auto-sent stem config on connection, and dedicated config screen.
Combine ANC mode selector with listening mode cycle visibility into a unified noise control component. Eye icons control which modes appear in the dashboard card and settings. Pro gating with stars icon for upgrade-required features.
Add 64 unit tests covering all new decoders, model feature flags, malformed payloads, and rename byte-length validation.
AAP connections now run in appScope via AapLifecycleManager, independent of MonitorMode. Fixes AAP not connecting when monitor mode is MANUAL.
Also fixes reconnect cleanup on flow cancellation (try/finally).
Free users see only their highest-priority profiled device. Additional devices are hidden behind an upgrade card showing the count and a flavor-aware CTA (Upgrade/Donate).
Wire up the missing drag-to-reorder UI that the priority hint already advertises. Long-press a profile row to reorder. Extracts a reusable ReorderableState component into common/compose.
Backend (repo + ViewModel) was already in place; this adds the gesture handling, auto-scroll, visual feedback, and ID-based reorder validation.
Move per-device persist logic from DeviceMonitor into a pure PodDevice.toCachedState() extension in the cache package. Add ToCachedStateTest with coverage for creates, skips, dedup, and slot preservation. Delete unused PodSorter.
Eliminate DeviceStatePersister class by chaining persistence as a side effect in DeviceMonitor's flow. The flow is now shared via replayingShare(appScope) so persistence runs once per emission regardless of subscriber count, and works for BLE-only devices without MonitorService.
Move DeviceStatePersister and AapKeyPersister from reaction to monitor package since they are always-on infrastructure, not user-togglable reactions.
Add periodic ticker to BlePodMonitor to force stale device eviction when BLE scanner produces no results, fixing cached card not appearing after disconnect.
Replace PodDeviceCache (raw BLE scan bytes) with DeviceStateCache that stores decoded combined device state (battery, charging, model) per profile.
Battery values persist across app restarts with per-slot timestamps. Cached-only cards appear for offline devices with muted visuals and a staleness indicator. Fallback chain: AAP -> BLE -> cached.
Add AirPodsPro2UsbcAapSessionTest with real captured bytes from a live
device session (model A3048, Pixel 8, 2026-04-02). Covers handshake,
device info, battery states, private keys, all Pro 2 USB-C settings
(including ADAPTIVE ANC, VolumeSwipe, ConversationalAwareness),
ear detection across 6 transitions, and unhandled messages.
Also document ChargingState observations across models and
EndCallMuteMic subtype variations in code comments.
Remove false positive hasEarDetection from Beats Studio Buds and Studio Buds+ (neither has in-ear detection). Remove false positive hasVolumeSwipe and hasVolumeSwipeLength from AirPods 4 ANC (volume swipe is exclusive to AirPods Pro). Add missing hasEarDetection to AirPods Max, AirPods Max USB-C, AirPods Gen 4, Beats Solo Pro, and Beats Studio 3 (all have head/ear detection per Apple docs).
Add AirPodsProAapSessionTest with real captured protocol data from AirPods Pro (A2084). Fix AIRPODS_PRO feature flags: remove hasVolumeSwipe/Length (hardware limitation), add hasEndCallMuteMic (firmware-supported). Fix primary pod decoder to accept byte[2]=0x00 format sent by Pro 1 on initial connect.
Only attempt AAP connections to classically-connected devices, eliminating futile retries for devices connected to other phones.
- Filter initialConnect() to devices in connectedAddresses
- Use mapLatest so stale retry loops cancel on state changes
- Parallelize per-profile connection attempts
- Add 5s connect timeout (best-effort) to cap retry cycles
- Add classic BT check to reconnectOnDisconnect()
- Keep MonitorService alive when AAP connections are active
When connected via AAP, the device reports its hardware model number. If the profile has a wrong or missing model, detect the mismatch and automatically correct it with a reconnect to apply correct feature flags (ANC modes, InitExt, etc.).
Adds modelNumbers field to PodModel enum with Apple hardware identifiers for all known devices, and a fromModelNumber() lookup function.
darken