Adds a per-battery 'Optimized' chip on the overview card when pods report wire value 0x05 (CHARGING_OPTIMIZED), which was already decoded but collapsed into a plain 'Charging' in the UI. On AirPods Pro 3, also adds a user-facing toggle for the device-side Optimized Charge Limit (AAP setting 0x3B).
- Decode setting 0x3B via decodeAppleBool so unknown values fall through instead of coercing to false
- Bypass ear-detection queue for SetDynamicEndOfCharge so the toggle works while pods sit in the closed case
- Expose per-slot ChargingState? on PodDevice; StatusChipRow renders 'Optimized' for CHARGING_OPTIMIZED, 'Charging' for CHARGING
- New BatteryCard in device settings with experimental warning (pattern matches Sleep Detection)
- Generic settingRejectedEvents flow alongside the existing offRejectedEvents so the toggle can show a dedicated snackbar on verification failure
Adopts the Wireshark AAP dissector (pabloaul/apple-wireshark) as a third reference source alongside LibrePods and MagicPodsCore. Catalogues every known message type and control/setting ID, corrects DeviceInfo field labels, and adds sealed AapPacket hierarchy with Connect Response parsing. Case Info probe (Pro 3), Sleep event, and Dynamic End of Charge decoders are in place for future use.
Introduce BatteryLayout enum with size-driven dispatch. Drops minWidth from 80dp to 40dp so the battery widget can be placed at one cell. At 1-cell-wide placements render a compact icon+percent stack; wider sizes keep the current NARROW/WIDE layouts.
Adds Stop, Fast Forward, Rewind, Mute, Cycle Noise Control, and Toggle Transparency as gesture targets. Migrates StemAction from enum to sealed interface with polymorphic serialization to unlock future parameterized actions. ANC actions are gated per-device capability and reuse the existing listening-mode cycle mask.
Move press timing, call controls, and stem mappings out of the Controls card into a new Press Controls screen. The screen name is device-agnostic so it applies to both stemmed AirPods and the AirPods Max's Digital Crown/noise button.
Stem mappings are now per-device (stored on the AppleDeviceProfile) rather than a single app-global DataStore. The Pro gate for mappings moves from screen entry to per-change with an Upgrade badge on the mappings card header, so free users can still access the non-Pro press timing and call-control settings that live on the same screen.
Split AapSessionEngine into dedicated controllers (AapAncController, AapOutboundController), a typed inbound decoder (AapInboundInterpreter), a HID frame batcher (HidTracker), and a device-info diagnostics helper (AapDeviceInfoDiagnostics). Each controller returns typed decisions carrying state, timer actions, and logs instead of mutating engine state via callbacks. AapSettingsCoordinator is now stateless — pending queue and verification state live in engine runtime state.
All coroutine timer Jobs live in the engine's timerJobs map keyed by EngineTimerKey, with cancelAllTimers() on reset to prevent forgotten cancellations. Engine event dispatch is split: suspend path for user-initiated sends (errors propagate to caller), non-suspend for sync events (timer fires, inbound updates).
Fix Elvis operator precedence bug in visibleAncModes() where OFF passed the filter unconditionally. Move filtering logic to PodDevice.visibleAncModes extension, unifying DualPodsCard, SinglePodsCard, and DeviceSettingsScreen. Gate AllowOffOption inference on pod-in-ear + 1.5s stability to prevent false positives from in-case OFF reports.
During case transitions, AirPods send 800+ cmd 0x0017 HID frames in ~20s. Previously each logged identically at VERBOSE with raw hex (~160KB noise). Now a HidTracker classifies frames (service directory, descriptor bulk, terminator) and batches consecutive bulk frames by (phase, fill), emitting 3-4 summary lines instead of 822.
Track lastAncSentAt separately so non-ANC commands during flush don't break the ANC echo debounce window. Prioritize ANC for post-flush verification.
Move HANDSHAKING→READY transition to top of processMessage so decoded battery, stem press, and device info messages also trigger it.
Sort flush: AllowOffOption before AncMode before others, preventing device rejection when enabling OFF mode.
Queue all setting commands when no pod is in ear, flush when a pod goes in. Enable the adaptive noise slider when ADAPTIVE mode is pending. Show an info box when settings changes are pending.
Extract AapSessionEngine (state, send path, message processing, inference) and AapSettingsCoordinator (queue, optimistic updates, verification) from AapConnection, reducing it from 773 to 173 lines.
Device info card: add model label with Apple model number, rename label to
Bluetooth Device Label, show cursive font on name mismatch with system BT
name, combine first/last seen on single row, add profile prefix to subtitle.
ANC mode: extract shared AncModeUi helpers for labels and icons, update
overview cards and device settings to use shared components.
Swap the logical mapping for `EndCallMuteMic` settings to align with hardware states observed on AirPods Pro devices. Updated session tests for Pro 1, 2, and 3 to reflect the corrected protocol behavior.
Based on Apple's official documentation, enable features for models
that support them per iOS but were previously excluded in CAPod:
- Gen 1/2: microphone mode (auto/left/right)
- Gen 3: press speed, press hold duration, tone volume, microphone mode
- Gen 4 non-ANC: press speed, press hold duration, tone volume
- Max original/USB-C: listening mode cycle, allow off option
Add SettingsInfoBox title support and experimental feature warning for Sleep Detection and Personalized Volume toggles with issue tracker action.
Pro-gate tone volume, microphone mode. Un-gate sleep detection, conversation awareness. Fix SettingsSwitchItem allowing direct switch toggle to bypass requiresUpgrade.
Older devices silently ignore the 0x4D packet, so there is no need to gate it per model. Sending it unconditionally prevents silent feature degradation when new H2+ models are added without the flag.
Remove needsInitExt from PodModel.Features.
Combine reaction one-pod mode (autoplay/autopause) and firmware NC-with-one-AirPod into one setting. The merged toggle always sets the app-local flag and additionally syncs the firmware NC setting via AAP when connected.
Also remove redundant @OptIn(ExperimentalCoroutinesApi::class) annotations from tests, already covered by the global compiler opt-in flag.
Real AirPod firmware silently drops writes with the LibrePods-documented 0x21 subtype. Switch to the compact 0x20 format that matches what devices actually emit in their echo frames. Also enforce the complementary-pair invariant at the SetEndCallMuteMic command boundary so validation runs before the optimistic UI update.
The encode/decode now flips UI 0..100 to wire 100..0. Update the clamp and decode expectations accordingly, and add a round-trip test to guard against asymmetric changes in either direction.
PlayPause coerced null per-side ear values to false, making all ear states invisible when resolvedPrimaryPod was unknown. Fall back to AAP aggregate state (isBeingWorn/isEitherPodInEar) when per-side mapping is unavailable, keeping PodDevice.isLeftInEar/isRightInEar truthful for UI consumers. Add isEitherPodInEar to PlayPauseMonitorKey for proper dedup. Add diagnostic logging at the distinctUntilChangedBy boundary.
Move each composable from PodCardComponents.kt into its own file under a new cards/components/ subpackage. Add previews to each file. Also add getBatteryIcon() for Compose Material Icon battery levels used in the popup.
When both pods broadcast independently (one in case, one on desk), the pod inside the case carries authoritative case state via hasCaseContext bits. Previously, whichever address was processed last would overwrite the other, causing case state to flip-flop between OPEN and NOT_IN_CASE every scan cycle.
Two-layer fix: BlePodMonitor.processWithCache() now prefers the pod with case context when two scan results map to the same identity in one batch. ApplePodsFactory.getLatestCaseLidState() no longer treats NOT_IN_CASE as authoritative when recent history contains a broadcast with case context.
Migrate reaction toggles (auto-play, auto-pause, auto-connect, popups) from global ReactionSettings singleton to per-profile fields on AppleDeviceProfile. Each paired device can now have independent reaction behavior.
Extract ReactionConfig snapshot to decouple PodDevice from AppleDeviceProfile — reaction consumers read device.reactions instead of device.profile. Remove auto-connect from upgrade benefits (now free). Add LegacyReactionSettingsReader for one-shot DataStore migration.
Switch the AAP rename packet to the opcode 0x1A format (04 00 04 00 1A 00 01 [size] 00 [name]) matching the LibrePods documentation and Linux implementation. The previous 0x1E variant (from the LibrePods Android code) was silently ignored by AirPods Pro 2 USB-C firmware — no 0x001D echo, no persistence across reconnect.
Verified on AirPods Pro 2 USB-C (firmware 81.2675...): the device now echoes the new name back via the next 0x001D INFORMATION message, and the name persists after disconnect/reconnect.
Also hardens the rename UX: gate the edit icon on isAapReady (was isAapConnected, which allowed sending during HANDSHAKING), apply an optimistic deviceInfo update with a scoped rollback on send failure, surface send errors via a new Event.SendFailed + snackbar, and restrict dialog input to ASCII with inline error feedback. Unifies send() / sendProGated() through a single sendInternal() helper so error plumbing benefits every command, not just rename.
Note: this only updates the AirPods firmware's self-reported name. Android's system Bluetooth settings read from the bond database and are not affected — renaming there still requires the Android system Bluetooth UI.
darken