* feat(upgrade): Add Pro status view, grace UI and sub-to-IAP switch
* fix(upgrade): Pad restore purchase to a minimum visible duration
* ui(upgrade): Mention Play-website install fix in restore troubleshooting
* fix(upgrade): Stop re-acknowledging already-acked purchases
* ui(settings): Move upgrade status row into the Other category
- Show the time until the case is full inside its charging chip, learned from
the case's own rising level with the existing charge-band model; no rating
exists for case charging, so the first charge learns before it shows
- Derive a case battery health from observed transfer efficiency: pod percent
gained per case percent spent while docked and unplugged, corrected by each
pod's own health, compared against Apple's "with charging case" totals
- Case data is only genuine while a pod is docked — both transports silently
freeze the last value otherwise. Battery updates now flag whether the case
entry is live, and BLE gains strict same-frame case accessors, so estimates
never learn from frozen echoes
- The case deliberately gets no runtime estimate: idle-then-burst drain has no
meaningful hourly rate
- Mark the case metrics as experimental in the Battery settings card
- Show a "Still determining — check back after a few more listening sessions"
placeholder under Battery Health in the device info sheet while the estimate
is still accumulating data, so the feature is discoverable from day one; no
placeholder for profiles without a paired device, where it could never resolve
- Reorder the Battery card: time remaining & health settings first, then a
divider, then the charging-side settings (charge limit, charged notification)
- Mention the battery-health component in the estimate toggle and reset texts
- Ground the charge-band boundaries in Apple's documented fast-to-80%/trickle
charging behavior and standard lithium CC/CV charging references
- The gauge line under the percentage now always shows the runtime estimate
("if used now") even while charging; the time-until-charged moved into the
charging chip itself ("Charging · 25m"), so the two can't be confused
- Battery health is now computed and shown per pod (Left/Right paired row in
the info sheet, mirroring the serial rows) — single-pod listening habits or
a replaced earbud make the sides genuinely diverge, and a combined figure
would mask a failing pod
- While a pod charges, fit its rising level and show the time until full in the
gauge instead of the runtime estimate; learned charge rates are persisted per
slot so the ETA appears immediately on later charges
- Suppress the charge ETA during Optimized Battery Charging holds, the final
trickle phase, and whenever the level stalls longer than one visible step
should take (granularity-aware: 1% AAP steps vs 10% BLE steps)
- Clear a slot's fit window when its readings switch between AAP and BLE — the
granularity jump would otherwise read as a fake level step
- Derive a battery-health percentage (median of accumulated drain rates vs the
model's rated life) and show it in the device info sheet; the info button now
also appears for BLE-only devices once health data exists
- Tag learned rates with the model they came from so re-pointing a profile at
different hardware starts learning fresh instead of inheriting foreign rates
- Track how many sessions blended into each learned rate and require three
before a health figure is shown
- Replace the global estimate toggle with a per-device toggle stored on the profile
- Seed the estimate from each model's rated battery life and show it immediately, using
the rating as a hard upper bound on displayed life while the measured rate converges
- When the ANC mode is unknown, seed from the shorter of a model's ANC-on/off ratings
- Show a projection while charging ("if used now") without ever learning from a rising battery
- Consolidate charge limit, "notify when charged", the estimate toggle and reset into one
Battery card; the charge notification now works for any live device, not only classic
audio connections
- Smooth the displayed time asymmetrically (drop fast, rise slow) so a faster-than-rated
drain stops over-promising within a couple of updates
Adds a dashboard hint card pointing at the existing Troubleshooter when a profile is connected to the system (audio) but CAPod is receiving no live data — the symptom of a phone dropping AirPods BLE broadcasts (e.g. some HyperOS devices, #603). Debounced ~15s so it doesn't flash during the gap between an audio connection and the first broadcast, and suppressed whenever any pod is live so it never claims 'no data' while data is visibly arriving.
Reacts to the AirPods speaking-detection event (AAP 0x4B): lowers media volume by a configurable amount or pauses playback when you start talking, and reverts when you stop. Per-profile, Pro-gated, opt-in (default off).
Decodes the speaking status from the last payload byte ({1,2}=start, {6,8,9}=stop, else keep-alive); engage/disengage with a frame-idle stale timeout to recover a dropped stop, plus disconnect and service-stop cleanup.
Replaces the origin-tracking machinery with a simpler model that matches Apple's iOS/macOS behavior: auto-play strictly resumes a CAP-dispatched pause, gated by a sticky boolean cleared on inactive→active transitions. The original fire-on-cold-wear behavior is preserved as a per-device opt-in 'Start music on wear' setting.
Sync flags with what the BLE classes actually report and what iOS exposes:
- AirPods Gen 1/2/3: enable hasEarDetection (already parsed via DualApplePods) and hasEarDetectionToggle
- AirPods Gen 3, Pro 1: enable hasEndCallMuteMic (force-sensor stems)
- Powerbeats Pro, Beats Fit Pro: enable hasEarDetectionToggle (iOS exposes it)
- Beats Solo Pro, Studio 3: drop hasEarDetection (over-ear, BLE class is bare SingleApplePods)
- FAKE_AIRPODS_GEN1/2/3: enable hasEarDetection to match HasEarDetectionDual
- Generalize microphone mode description from 'AirPod' to 'earbud'
Tests rewritten as exhaustive set assertions plus implication invariants.
Replaces the user-facing scanner mode setting with an automatic policy that picks LOW_LATENCY when a profile-paired device is connected, BALANCED in the foreground, and LOW_POWER in the background. The TroubleShooter scopes a temporary LOW_LATENCY override via a refcounted withTemporaryOverride block so overlapping callers stay correct.
Fixes a regression where the controller could block BLE scanning entirely if BLUETOOTH_CONNECT was missing or the HEADSET profile proxy stalled, and adds a reactive bondedDeviceAddresses flow so bond changes propagate without waiting for an unrelated input. Cleans up the now-dead scanner mode strings across all locales and unused ScannerMode fields.
- Hide reactions and AAP sections unless device is classically connected
- Move advanced-settings-unavailable card to the bottom of the list
- Show 'device not nearby' infobox when out of range
- Show missing-paired-device banner with edit-profile action
- Replace pending banner with snackbar on user-initiated change
Adds a per-battery 'Optimized' chip on the overview card when pods report wire value 0x05 (CHARGING_OPTIMIZED), which was already decoded but collapsed into a plain 'Charging' in the UI. On AirPods Pro 3, also adds a user-facing toggle for the device-side Optimized Charge Limit (AAP setting 0x3B).
- Decode setting 0x3B via decodeAppleBool so unknown values fall through instead of coercing to false
- Bypass ear-detection queue for SetDynamicEndOfCharge so the toggle works while pods sit in the closed case
- Expose per-slot ChargingState? on PodDevice; StatusChipRow renders 'Optimized' for CHARGING_OPTIMIZED, 'Charging' for CHARGING
- New BatteryCard in device settings with experimental warning (pattern matches Sleep Detection)
- Generic settingRejectedEvents flow alongside the existing offRejectedEvents so the toggle can show a dedicated snackbar on verification failure
New home-screen widget that toggles AirPods ANC modes (Off / ANC / Transparency / Adaptive) directly, with six adaptive layouts that pick based on widget size (QUAD_CORNERS, ROW_ICONS, COLUMN_ICONS, GRID_2X2, ROW, COLUMN). Consolidated battery+ANC configuration into a single ViewModel that detects widget type from AppWidgetManager. ACTIVE state uses Material3 secondaryContainer/onSecondaryContainer for guaranteed contrast. Includes live config preview, preview subtitle, stale-selection guard, device-label toggle, and aligned icons with the app's AncModeSelector.
Adds Stop, Fast Forward, Rewind, Mute, Cycle Noise Control, and Toggle Transparency as gesture targets. Migrates StemAction from enum to sealed interface with polymorphic serialization to unlock future parameterized actions. ANC actions are gated per-device capability and reuse the existing listening-mode cycle mask.
Move press timing, call controls, and stem mappings out of the Controls card into a new Press Controls screen. The screen name is device-agnostic so it applies to both stemmed AirPods and the AirPods Max's Digital Crown/noise button.
Stem mappings are now per-device (stored on the AppleDeviceProfile) rather than a single app-global DataStore. The Pro gate for mappings moves from screen entry to per-change with an Upgrade badge on the mappings card header, so free users can still access the non-Pro press timing and call-control settings that live on the same screen.
Sort profiled devices into tiers (system-connected > nearby > cached), ordered by profile list within each tier. Collapse non-pinned cards to a compact battery tray with mini gauge rings matching the expanded card design. System-connected and top devices stay expanded; others can be tapped to toggle.
Queue all setting commands when no pod is in ear, flush when a pod goes in. Enable the adaptive noise slider when ADAPTIVE mode is pending. Show an info box when settings changes are pending.
Extract AapSessionEngine (state, send path, message processing, inference) and AapSettingsCoordinator (queue, optimistic updates, verification) from AapConnection, reducing it from 773 to 173 lines.
Move serial, firmware, build, manufacturer, and per-pod serials from
the info card into a ModalBottomSheet triggered by an info icon.
Firmware+build and left+right pod serials render as paired rows.
Add SettingsInfoBox title support and experimental feature warning for Sleep Detection and Personalized Volume toggles with issue tracker action.
Pro-gate tone volume, microphone mode. Un-gate sleep detection, conversation awareness. Fix SettingsSwitchItem allowing direct switch toggle to bypass requiresUpgrade.
Combine reaction one-pod mode (autoplay/autopause) and firmware NC-with-one-AirPod into one setting. The merged toggle always sets the app-local flag and additionally syncs the firmware NC setting via AAP when connected.
Also remove redundant @OptIn(ExperimentalCoroutinesApi::class) annotations from tests, already covered by the global compiler opt-in flag.
darken