BluetoothSocket.connect() is a blocking JNI call that ignores coroutine cancellation, so the previous withTimeout in AapAutoConnect only cancelled the suspending wrapper while the native thread stayed pinned. Hung threads accumulated and could trigger ANRs.
Move the timeout inside AapConnection and run the blocking connect on a daemon thread; on timeout, close the socket from the caller thread to unblock the native call (the documented Android pattern for cancelling in-flight L2CAP connects).
Also cancel appScope before delegating uncaught exceptions so coroutines have a best-effort window to release resources before the system handler terminates the process.
Battery slot percent comparisons in mergeBatterySlot/hasStateChanged compiled to Intrinsics.areEqual on boxed Float; R8 optimization on Android 10/11 dropped a null check during inlining and the resulting NPE escaped onEach { persistLiveDevices }, cancelling the upstream combine and freezing every observer of DeviceMonitor.devices.
Comparisons now operate on primitive float (cmpg-float in dex) so no Intrinsics.areEqual call remains in the merge path. The persist loop also catches and reports per-profile, and AAP-only profiles with active DeviceInfo are now persisted even when no BLE pod is in range.
Wrap logging, reporting, and Looper resume calls so the foreground service timing exception suppression cannot itself trigger another crash. Extract handler into a dedicated class with seams for unit tests.
Bit 5 of pubStatus is always set on A3454 and no longer carries the wear flag (unlike Max gen 1). Read bits 1 and 3 instead — the per-earcup sensors. OR rather than AND so phones that only see one bit reliably still report worn correctly.
Closes#548
Sync flags with what the BLE classes actually report and what iOS exposes:
- AirPods Gen 1/2/3: enable hasEarDetection (already parsed via DualApplePods) and hasEarDetectionToggle
- AirPods Gen 3, Pro 1: enable hasEndCallMuteMic (force-sensor stems)
- Powerbeats Pro, Beats Fit Pro: enable hasEarDetectionToggle (iOS exposes it)
- Beats Solo Pro, Studio 3: drop hasEarDetection (over-ear, BLE class is bare SingleApplePods)
- FAKE_AIRPODS_GEN1/2/3: enable hasEarDetection to match HasEarDetectionDual
- Generalize microphone mode description from 'AirPod' to 'earbud'
Tests rewritten as exhaustive set assertions plus implication invariants.
Glance only calls provideGlance() once per widget session; subsequent update() calls recompose the existing composition without re-running provideGlance. The previous capture-once approach left widgets frozen at initial state because the composition had no reactive State to read.
Subscribe to a widgetDeviceFlow(profileId) inside provideContent that pre-filters by WidgetDeviceKey, so the composition recomposes on visible state changes without firing on every BLE advertisement. Replace updateAll() with explicit per-GlanceId update() calls in WidgetManager, with a platform-id fallback when Glance returns no IDs.
Replaces the user-facing scanner mode setting with an automatic policy that picks LOW_LATENCY when a profile-paired device is connected, BALANCED in the foreground, and LOW_POWER in the background. The TroubleShooter scopes a temporary LOW_LATENCY override via a refcounted withTemporaryOverride block so overlapping callers stay correct.
Fixes a regression where the controller could block BLE scanning entirely if BLUETOOTH_CONNECT was missing or the HEADSET profile proxy stalled, and adds a reactive bondedDeviceAddresses flow so bond changes propagate without waiting for an unrelated input. Cleans up the now-dead scanner mode strings across all locales and unused ScannerMode fields.
- Apply seenLastAt freshness to all unauthenticated BLE samples (worn and not-worn). The earlier scoping to not-worn-only collapsed the second worn sample for BLE-only autoplay confirmation, so the staged play never fired.
- Replace distinctUntilChangedBy with a manual filter so worn samples that need to reset an active pause debounce (count went up) can pass through even when the monitor key is otherwise identical.
- Skip BLE-only autoplay confirmation for trusted sources. With BLE_IRK_MATCH and AAP, autoplay now fires on the first not-worn -> worn transition, mirroring the pause-debounce skip on the same sources.
- Skip the reaction entirely when the previous emission had no live evidence (NO_LIVE_BLE). Prevents app-process-start from synthesising a fake not-worn -> worn transition and firing autoplay while the user is already wearing the pods. Same guard handles mid-session BLE gap recoveries.
- Add MonitorFlowTests covering process-start-worn, genuine-insertion-after-startup, mid-session BLE-gap recovery, IRK-matched immediate autoplay, BLE-only autoplay confirmation, 3-sample pause debounce, and rebound-tolerated debounce reset.
- Commit pending pause when a trusted source (AAP / BLE_IRK_MATCH) corroborates the not-worn condition mid-debounce, instead of dropping pending silently.
- Scope debounceFreshness to not-worn samples only; identical both-in samples no longer pass distinctUntilChangedBy and can't accidentally trigger BLE-only auto-play confirmation.
- Add resetTolerance to PendingPauseDebounce so a single corrupt count-up advert no longer kills a legitimate pending pause; reorder reset checks so rawDecision.shouldPlay resets immediately.
- Drop bleKeyState from the INFO autoPause log; source already encodes trust without leaking key-configuration state to logcat.
- Add flow-level MonitorFlowTests verifying the distinctUntilChangedBy interaction with seenLastAt freshness, plus the #557-direction test (AAP-worn vs corrupt-BLE-not-worn) and rebound-tolerance test.
- Clarify in BLE_ANONYMOUS KDoc that the path is unreachable in production via DeviceMonitor.primaryDevice.
Classifies the ear-detection source (AAP / BLE_IRK_MATCH / BLE_PROFILE_FALLBACK / BLE_ANONYMOUS / NO_LIVE_BLE) and applies a 3-sample debounce only to unauthenticated BLE paths. AAP and IRK-authenticated BLE pass through unchanged.
Also tightens toEarDetectionState() to prefer AAP aggregate over BLE per-side bits whenever AAP EarDetection is present, and suppresses pause on NO_LIVE_BLE (cache-only state) to avoid firing without live evidence.
Adds push: [main] alongside workflow_dispatch so edits to README.md, _config.yml, _layouts, or the CHANGELOG.md template publish without a manual dispatch. The chain step in release-tag.yml still runs after release publish to guarantee the new release is in site.github.releases by the time Pages rebuilds — concurrency: cancel-in-progress: false serialises the two runs.
Adds an if: github.ref == 'refs/heads/main' guard on the deploy job so workflow_dispatch from a non-main branch builds for verification but doesn't deploy.
After moving Gemfile/Gemfile.lock to fastlane/, the - Gemfile / - Gemfile.lock entries in _config.yml's exclude list are no-ops; the parent fastlane exclude already covers everything inside.
.gitignore picks up _site/, .jekyll-cache/, vendor/bundle/ so local Jekyll runs don't leave tracked artifacts.
release: published events triggered by secrets.GITHUB_TOKEN do not start new workflow runs (only workflow_dispatch and repository_dispatch are exceptions). The Pages workflow's release: published trigger would never have fired in production since release-tag.yml's softprops/action-gh-release uses GITHUB_TOKEN to publish.
Fix: drop the release: published trigger and have release-tag.yml's release-github job explicitly run gh workflow run pages.yml --ref main after the release is created. release-github gains actions: write to authorize the dispatch.
Also adopts refinements from sibling org PRs (permission-pilot#356, bluemusic#220):
- Top-level permissions reduced to contents: read; pages: write and id-token: write moved to the deploy job only (least privilege)
- JEKYLL_GITHUB_TOKEN on the build step so jekyll-github-metadata authenticates when fetching site.github.releases
- Sanity-check step (test -f _site/index.html && _site/CNAME) fails fast if Jekyll produced nothing
- Explicit upload-pages-artifact path: ./_site matches the build's destination
- Verify fastlane Bundler wiring step (bundle exec fastlane --version) lets workflow_dispatch dry_run=true exercise the relocated Gemfile before the next real release
The root Gemfile only ever declared the fastlane gem and lived next to fastlane configuration anyway. Moving it under fastlane/ matches that ownership and keeps the repo root cleaner.
release-gplay job now sets BUNDLE_GEMFILE=fastlane/Gemfile and runs ruby/setup-ruby with working-directory=fastlane so bundler-cache resolves the moved Gemfile. fastlane lanes still run from the repo root.
Replaces the auto pages-build-deployment (which still uses Node-20 actions/checkout@v4 and actions/upload-artifact@v4) with a custom workflow using configure-pages@v6, jekyll-build-pages@v1.0.13, upload-pages-artifact@v5, deploy-pages@v5.
Triggered by release publication so the changelog Liquid template (which reads site.github.releases) only rebuilds when a release actually exists. workflow_dispatch is kept for manual rebuilds when debugging Pages content.
- Hide reactions and AAP sections unless device is classically connected
- Move advanced-settings-unavailable card to the bottom of the list
- Show 'device not nearby' infobox when out of range
- Show missing-paired-device banner with edit-profile action
- Replace pending banner with snackbar on user-initiated change
d4rken-org-releaser[bot]